Aluminium profile with powder coating
Aluminium profile with powder coating
Aluminium profile with powder coating
Aluminium profile with powder coating
Aluminium profile with powder coating
Aluminium profile with powder coating
Aluminium profile with powder coating

Profilu d'aluminiu cù vernice in polvere

The principle of the electrostatic spraying process of aluminum profiles. U rivestimentu in polvere hè spruzzatu nantu à a superficia di u pezzu cù un dispositivu di spruzzatura di polvere elettrostatica. Sutta l'azzioni di l'electricità statica, the powder will be uniformly adsorbed on the surface of the workpiece to form a powdery coating; the powdery coating is dried at high temperature

Dettaglio di u Produttu

Feedback avà

Profilu d'aluminiu cù vernice in polvere

The principle of the electrostatic spraying process of aluminum profiles. U rivestimentu in polvere hè spruzzatu nantu à a superficia di u pezzu cù un dispositivu di spruzzatura di polvere elettrostatica. Sutta l'azzioni di l'electricità statica, the powder will be uniformly adsorbed on the surface of the workpiece to form a powdery coating; the powdery coating is dried at high temperature. Baked and leveled and solidified into a final coating with various effects; the spraying effect is superior to the spray painting process in terms of mechanical strength, adhesion, corrosion resistance, aging resistance, ecc. The advantages of powder coating are: (1) high efficiency and energy saving: because it is a one-time film formation, it can increase productivity by 30-40% and reduce energy consumption by about 30%; (2) less pollution: no organic solvent volatilization (not included in paint coatings) (Hazardous gases such as toluene and xylene) (3) Good film coating performance: one-time film thickness can reach 50-80μm, and its comprehensive indicators such as adhesion and corrosion resistance are excellent (4) Colors can be customized according to customer requirements Produces various colors with low chance of color difference

Descrizione di Prodotti:

1 Tipu di cummerciale Fabricante
2 Standard: GB 5237-2008; EN755, etc.,
3 Serie di produttu: Profilatu d'aluminiu per materiale di custruzzione è materiali industriali.
4 Prezzo: Basatu nantu à u prezzu di l'Internet Aluminiu Nanhai(http://www.lvdingjia.com/) + Tariffa di trasfurmazione
5 Terminu di pagamentu: T / T, L / C à vista
6 Trattamentu di superficia: Finitura di mulinu, Anodizazione, Rivestimentu in polvere, Elettroforesi, Finitu di Legnu, Calore Insultante

Specificazione:

7 Lega: 6063
8 statu: T4 / T5 / T6
9 lunghezza 1m-7m, generalmente 5,85 m per u container
10 Spessore Anodizante Normale: MEDIA >10 micru,
11 Spessore nurmale di revestimentu in polvere: >40micru
12 spissori: 0.4mm 0,5 mm 0,6 mm,0.8mm,1.0mm,1.2mm,1.4mm,2.0mm,3.0mm,4.0mm ecc..

Altre infurmazione

13 Prezzo Prezzu di lingottu primariu NH / LME + u costu di cunversione u più cumpetitivu
14 Politica di muffa Ogni articulu acquistatu u volumu ghjunghje à 1 tunnellati, rimbursà u pagamentu di u moldu
15 Orariu di consegna indrentu 20 ghjorni da u tempu di l'ordine
16 Terminu di pagamentu 30% accontu, u pagamentu di u saldu contra copia B / L in 7 ghjorni
17 Standard di imballu drentu à a film di prutezzione, fora di film chì si ritrova o di carta spessa
18 Certificazione SGS / TUV - ISO9001:2008 - ISO14001:2004 CE RoHS
19 Useage Culisante, casement, Windows, porte, muru sipariu, industria, tetti di dicurazione, scherma, guardrail
20 OEM I prufili d'aluminiu persunalizati sò dispunibili

 

The advantages of powder coating aluminum profile:

There are three types of surface treatment methods for aluminum profiles: anodizazione, electrophoretic coating, and powder coating. Each method has its own advantages. The advantages of powder coating are mainly introduced below.

Significant advantages of powder coating:

  1. The process is relatively simple.

Mainly due to the improvement of the automatic accuracy of the main equipment in the production process, microcomputer control can be achieved for some of the main technical parameters, which effectively reduces the difficulty of process operation, and at the same time greatly reduces auxiliary equipment.

  1. High yield. In general, if all measures are proper, the occurrence of nonconforming products can be controlled to the maximum extent.
  2. The energy consumption is significantly reduced. In the ordinary anodizing and electrophoretic coating production process, the consumption of water and electricity is considerable, especially in the oxidation process. The output current of the rectifier can reach 8000 ~ 11000A, the voltage is between 15 ~ 17.5V, plus the heat consumption of the machine itself, it is necessary to keep cooling with circulating water. The power consumption per ton is often around 1000 degrees. In listessu tempu, the reduction of auxiliary facilities can also reduce some power consumption.
  3. The degree of pollution to water and the atmosphere is reduced, the use of tablet alkali, sulfuric acid and other liquid organic solvents is no longer used, reducing water and atmospheric pollution, and effectively improving the competitiveness of aluminum profiles and plastic steel profiles as environmentally friendly products. Correspondingly Reduced some production costs.
  4. The labor intensity of workers has been significantly reduced. Due to the use of automated assembly line operations, the feeding method and the use of fixtures have been significantly simplified, improving production efficiency and reducing labor intensity.
  5. The surface quality requirements of wool have been significantly reduced. The powder coating can completely cover the extrusion patterns on the surface of the profile, cover up some defects on the surface of the aluminum profile, and improve the surface quality of the finished aluminum profile.
  6. Some physical indicators of the coating film are significantly improved compared to other surface treatment films, such as hardness and abrasion resistance, which can effectively extend the service life of aluminum profiles.

The powder coating uses powder coating, and the process uses electrostatic spraying. The friction of the spray gun is used to make the powder particles carry a positive charge when sprayed out of the gun body under the influence of accelerated wind. It is electrostatically adsorbed and then cured at high temperature. It also enhances the paint's adsorption strength and prevents the paint film from falling off.

From the point of view of the process itself, it has a relatively high technological content and mixes paints of different colors to produce decorative effects of different colors, which is more in line with the needs of interior decoration. Consistent. In particular, the combined use of sprayed profiles and thermal break bridges has made it more fashionable, and powder sprayed profiles have greater development space, which is also irreplaceable for profiles produced by other processing methods.

 

Qualità:

Certificazione CE, SGS, ISO9001, Autenticazione ISO14001 è RoHS

 

Applicazione:

Aluminum window and door, building materials and industrial use aluminum extrusion profile

 

Mandate u vostru messagiu:

INQUISTA ORA
INQUISTA ORA